See How It Works

Usage instructions:
Warm your Fleshlight insert by soaking it in a sink/tub filled with warm water. (Note: Do not boil or microwave the insert.) Shake off the water and replace the insert in the Fleshlight case, adjust the tightness of the cap at the bottom to vary the suction of the insert, and finish by applying a liberal amount of lubricant (water-based only, as oil-based lubes will slowly destroy the insert over time) to the Fleshlight and yourself. The Fleshlight is now ready for use.

Cleaning instructions:
Simply rinse your Fleshlight insert with warm water and allow time for both to dry before storing. Do not use soap to clean your insert. For tough cleaning, the makers suggest using a little isopropyl alcohol. To maintain its soft feel, sprinkle a liberal amount of corn starch on the insert and shake off the excess powder. The makers do not recommend the use of talcum or baby powder. Shake out as much water as possible and place the insert in a well ventilated area, like near a window or next to a fan. For quick drying, slide a thin lint-free cloth/towel through it from one end to the other. When you return it to the case, leave the end caps loose so that air can continue to circulate.

With proper usage your Fleshlight will give you a lifetime of enjoyment!